FindGastro

Anka EPE2-P vs Duran Çelik DÇ 091: Footprint & Fit

We compare the Anka EPE2-P and Duran Çelik DÇ 091 on physical constraints, power density, and spatial fit to help you choose the right tea machine for your kitchen layout.

Choose the Duran Çelik DÇ 091 if your counter width is under 600 mm. The Anka EPE2-P requires a full 600 mm run but offers dual brewing. For tight spaces, the Duran Çelik is the only viable option.

FindGastro Editorial6 min read

Products compared

Category guide →
On this page

The two machines

Product Brand Category Key specs
A Anka Eco Stainless Steel 2 Teapot, Plate Tea Maker, 24 L, Electric Anka Tea Machines Power Source: Electric; Voltage: 220 V; Power: 2000 W
B Duran Çelik DÇ 091 Tea Maker, 23 L, Black Duran Çelik Tea Machines Power Source: Electric; Voltage: 220 V; Power: 2250 W

What actually separates them

Commercial tea machines are often judged by brew speed, but physical constraints dictate installation. The Anka EPE2-P and Duran Çelik DÇ 091 occupy different spatial footprints despite similar capacities.

We advise verifying utility connections with your dealer before ordering.

The space math

The Anka EPE2-P measures 600 mm wide by 360 mm deep, yielding a footprint of 0.216 m². Its compact depth allows it to slide into narrower runs, provided you have the full 600 mm width. The unit stands 500 mm tall, making it slightly taller than the Duran Çelik DÇ 091.

The Duran Çelik DÇ 091 is 500 mm wide and 480 mm deep, creating a footprint of 0.24 m². While narrower, its greater depth demands more clearance from walls or backsplashes. Both units occupy roughly 0.2 m² of counter space, excluding necessary service gaps.

Doors, drawers and service access

The Anka EPE2-P weighs 9 kg, making it significantly lighter than the Duran Çelik DÇ 091 at 14 kg. This 5 kg difference matters when maneuvering the unit through narrow kitchen doors or installing it on upper counters. The Anka’s lower weight also reduces floor loading stress.

The Duran Çelik DÇ 091’s 14 kg mass offers more stability during operation but complicates installation. You must verify that your floor can support the load, especially if placing it on raised platforms. The Anka’s 9 kg net weight is easier to handle for single-person moves.

Utilities and installation

Electrical requirements differ between the two machines. The Anka EPE2-P draws 2000 W at 220 V, while the Duran Çelik DÇ 091 requires 2250 W at the same voltage. This 250 W difference is minor but affects circuit load calculations. Both units are freestanding and do not require hardwiring.

Neither machine lists a required drain or ventilation in the spec sheet, which simplifies installation. However, you must confirm the supply phase with your dealer, as neither spec sheet states it. The Anka’s 24 L capacity and 2000 W power suggest a standard single-phase connection is sufficient.

Which kitchen each one fits

The Anka EPE2-P is ideal for cafes with narrow counters but ample width. Its dual-teapot design supports high-volume service without requiring a larger footprint. The 24 L capacity ensures you can serve more guests between refills, making it suitable for busy lunch rushes.

The Duran Çelik DÇ 091 fits kitchens with limited width but deep counter space. Its 23 L capacity is nearly identical to the Anka, but the single jug design may require more frequent refilling. It is best for operations where width is the primary constraint.

Where they differ

Specification A B What it changes in practice
Width 600 mm 500 mm Determines if the unit fits your counter run. Anka needs 600 mm; Duran Çelik fits 500 mm.
Depth 360 mm 480 mm Anka is shallower, saving wall clearance. Duran Çelik needs 480 mm depth, requiring more space from the wall.
Weight 9 kg 14 kg Anka is lighter, easier to move and install. Duran Çelik is heavier, offering more stability but harder handling.
Power 2000 W 2250 W Duran Çelik draws 12.5% more power. Both are 220 V, but circuit load must be checked for the higher draw.
Jugs 2 1 Anka’s dual jugs allow continuous brewing. Duran Çelik’s single jug may require waiting for a refill.

Strengths and weak spots

Strengths Limitations
A - Dual teapot design allows continuous brewing without interruption.
- Lighter weight (9 kg) makes installation and moving easier.
- Requires a full 600 mm width, which may not fit all counters.
- Skip it if your counter width is less than 600 mm; it will not fit.
B - Narrower width (500 mm) fits tighter counter runs.
- Heavier weight (14 kg) provides better stability during operation.
- Single jug design may require more frequent refilling during peak service.
- Skip it if you need dual brewing capability; it only has one jug.

Which one for which kitchen?

A cocktail bar

Cocktail bars often have limited counter space near the well. The Duran Çelik DÇ 091’s 500 mm width makes it easier to fit in tight spots. However, its 480 mm depth requires careful planning to avoid blocking access. The Anka EPE2-P’s 360 mm depth is shallower, but its 600 mm width may be too wide for a narrow well area.

Pick: Duran Çelik DÇ 091 Tea Maker, 23 L, Black

A juice or smoothie counter

Juice counters typically have deep prep areas but may be narrow. The Duran Çelik DÇ 091’s 480 mm depth might protrude too far into the prep zone. The Anka EPE2-P’s 360 mm depth is more compact, leaving more room for fruit prep. Its 600 mm width is manageable if the counter is wide enough.

Pick: Anka Eco Stainless Steel 2 Teapot, Plate Tea Maker, 24 L, Electric

A hotel minibar or room service

Hotel minibars often have small, dedicated tea stations. The Anka EPE2-P’s dual jugs are useful for room service, allowing quick preparation of multiple orders. Its 9 kg weight is easier to move if the station is relocated. The Duran Çelik DÇ 091’s single jug is less efficient for high-volume room service.

Pick: Anka Eco Stainless Steel 2 Teapot, Plate Tea Maker, 24 L, Electric

Before you order

  • Supply Phase: Neither spec sheet states the phase (single or three-phase). Confirm with your dealer to ensure compatibility with your kitchen’s electrical system.
  • Drain Requirements: Neither machine lists a drain requirement. Verify if a drain is needed for overflow or cleaning to avoid water damage.
  • Ventilation Needs: Neither machine lists ventilation requirements. Check if local codes or kitchen layout require additional ventilation for heat dissipation.
  • Noise Level: Noise levels are not provided. If the machine is near guest areas, verify noise output to ensure it meets comfort standards.
  • Warranty Terms: Warranty details are not included in the spec sheet. Contact the manufacturer or dealer to confirm coverage and service terms.

Our call

The choice between the Anka EPE2-P and Duran Çelik DÇ 091 hinges on your kitchen’s geometry. If you have a narrow counter run under 600 mm, the Duran Çelik DÇ 091 is the only option that fits. However, if you need dual brewing capability and have the width, the Anka EPE2-P offers superior service efficiency. Consider weight, power, and depth constraints before deciding.

Questions we get asked

Which machine is better for a narrow counter?

The Duran Çelik DÇ 091 is better for narrow counters, as it is 500 mm wide compared to the Anka EPE2-P’s 600 mm width.

Do I need a drain for these machines?

The spec sheets do not specify drain requirements. You must confirm with your dealer or local codes if a drain is necessary.

Can I install these machines myself?

Both machines are freestanding and electric. However, you should verify electrical compatibility and consult a professional for installation to ensure safety.

FindGastro Editorial · Commercial kitchen equipment editors

Author profile →