FindGastro

Anka EPE2-P vs SilverInox EL-02S: Footprint Reality Check

Spec sheet comparison of two 2-teapot commercial brewers.

If your counter run is under 600 mm, the SilverInox EL-02S is your only option. The Anka EPE2-P requires exactly 600 mm width but offers a shallower 360 mm depth. Choose SilverInox for vertical clearance under hoods; choose Anka for a lower profile if overhead space is unlimited.

FindGastro Editorial6 min read

Products compared

Category guide →
On this page

The two machines

Product Brand Category Key specs
A Anka Eco Stainless Steel 2 Teapot, Plate Tea Maker, 24 L, Electric Anka Tea Machines Power Source: Electric; Voltage: 220 V; Power: 2000 W
B SilverInox EL-02S Elite Tea Maker, 2 Teapot, 23 L, Black SilverInox Tea Machines Power Source: Electric; Voltage: 220 V; Power: 2250 W

What actually separates them

Commercial tea machines often claim compactness while demanding significant floor space. We compare the Anka EPE2-P and SilverInox EL-02S using manufacturer data.

The decision hinges on physical constraints. One unit is wider but shallower; the other is narrower but significantly taller. Understanding these trade-offs prevents ordering errors and ensures proper installation in busy cafe or restaurant environments.

The space math

The Anka EPE2-P occupies a 600 mm width by 360 mm depth, yielding a 0.216 m² footprint. This plate-style design prioritizes a narrow frontage, allowing it to slide into tighter side-by-side arrangements where width is the primary constraint.

The SilverInox EL-02S measures 540 mm wide and 410 mm deep, resulting in a similar 0.221 m² footprint. While the area is comparable, the SilverInox is 60 mm narrower but 50 mm deeper, shifting the spatial burden from width to depth.

Doors, drawers and service access

Height clearance is a critical differentiator. The Anka EPE2-P stands at 500 mm, making it significantly lower than the SilverInox EL-02S, which reaches 710 mm. This 210 mm difference determines whether the unit fits under standard low hoods or shelving.

The SilverInox includes side handles to facilitate transport, a practical feature for moving the 9 kg unit during cleaning or reconfiguration. The Anka lacks this specific mention, relying on its compact 500 mm height for easier manual handling without additional grips.

Utilities and installation

Power consumption differs by 250 W, with the Anka drawing 2000 W and the SilverInox requiring 2250 W. This results in a connected load of 2.0 kW versus 2.3 kW, impacting the electrical circuit requirements and potential thermal output in the kitchen.

Neither spec sheet specifies the supply phase or noise levels, creating installation ambiguity. Confirm the voltage phase with your dealer before ordering, as neither unit explicitly states if it operates on single-phase 220 V or requires three-phase power for optimal performance.

Which kitchen each one fits

The Anka EPE2-P is suitable for cafes, restaurants, and catering services, offering a 24-liter capacity with two removable teapots. Its 304 stainless steel construction ensures durability, while the automatic water system supports high-volume continuous brewing without manual refilling.

The SilverInox EL-02S targets cafes and restaurants with a 23-liter capacity and boiler-based brewing system. It features thermostat control for energy efficiency and an automatic shut-off when water runs out, providing safety and consistent temperature management for staff.

Where they differ

Specification A B What it changes in practice
Width 600 mm 540 mm Anka needs more width; SilverInox fits narrower runs.
Depth 360 mm 410 mm Anka is shallower, saving front counter space.
Height 500 mm 710 mm SilverInox is too tall for low hoods.
Power 2000 W 2250 W SilverInox draws more power, affecting circuit load.

Strengths and weak spots

Strengths Limitations
A - Lower 500 mm height fits under standard hoods.
- Shallower 360 mm depth saves front counter space.
- Requires full 600 mm width, limiting placement in narrow runs.
- Skip it if you have limited width space under 600 mm.
B - Narrower 540 mm width fits tighter counter runs.
- Includes side handles for easier transport and cleaning.
- Tall 710 mm height may not fit under low hoods.
- Avoid this if you need a low-profile unit for under-shelf installation.

Which one for which kitchen?

A cocktail bar

Speed at the well is critical. The SilverInox EL-02S is narrower (540 mm), allowing it to fit into tighter bar runs without obstructing movement. Its 2250 W power ensures rapid reheating, while the Anka’s 600 mm width might block access in cramped well areas.

Pick: SilverInox EL-02S Elite Tea Maker, 2 Teapot, 23 L, Black

A juice or smoothie counter

Prep volume and pulp control are key, but space is also tight. The Anka EPE2-P’s shallow 360 mm depth allows it to sit further back on the counter, leaving more room for fruit prep and blending. Its 500 mm height also reduces visual bulk.

Pick: Anka Eco Stainless Steel 2 Teapot, Plate Tea Maker, 24 L, Electric

A hotel minibar or room service

Small batches and quiet operation matter. Both units are electric and suitable for occasional use. The Anka’s lower height (500 mm) makes it less obtrusive in a service area, while the SilverInox’s boiler system provides consistent heat for quick refills. Either works if space allows.

Pick: Either

Before you order

  • Supply Phase: Neither spec sheet specifies single or three-phase power; confirm with dealer to avoid wiring issues.
  • Noise Level: No dB rating is provided; verify if the boiler or heating elements are too loud for guest areas.
  • Drain Requirement: It is unclear if the automatic water system requires a direct drain connection or just a fill line.
  • Warranty Terms: Warranty duration is not listed; confirm coverage for heating elements and control boards before purchasing.
  • Ventilation Needs: No ventilation requirements are stated; ensure adequate airflow around the 2250 W SilverInox to prevent overheating.

Our call

The Anka EPE2-P and SilverInox EL-02S serve similar functions but occupy space differently. If your kitchen has width constraints under 600 mm, the SilverInox is the only viable option. However, if you need a low-profile unit that fits under hoods, the Anka’s 500 mm height is superior. Always verify electrical phase and drain requirements before installation to avoid costly mistakes.

Questions we get asked

Which tea machine is better for a narrow counter?

The SilverInox EL-02S is better for narrow counters as it is 540 mm wide, compared to the Anka EPE2-P’s 600 mm width.

Do these machines require a drain?

The spec sheets do not specify drain requirements; you must confirm with the dealer if an automatic water system needs a direct drain connection.

What is the annual energy cost assumption?

Estimated annual energy is calculated assuming 8 hours per day, 300 days a year, at full nameplate power, resulting in 4,800 kWh for Anka and 5,400 kWh for SilverInox.

FindGastro Editorial · Commercial kitchen equipment editors

Author profile →